HD2717T - Temperature and Humidity. Transmitter and Datalogger, with or without display, RS485, analogue outputs, contacts.
The instruments of the HD2717T... series are transmitters, indicators, and ON/OFF regulators with data logging functions, they measure temperature and humidity.
The main feature of these instruments is their interchangeable probe. The probe can be replaced by the user without process interruption. Thus, the probe can be calibrated or repaired at a later time.
The instrument is available in three different versions: with horizontal probe (S.TO), vertical probe (S.TV) or with remote probe (S.TC), having the probe connected to the electronics by means of a cable of various lengths. The S.TO and S.TV probes are made of stainless steel AISI304, the S.TC probes can be of stainless steel AISI304 or POCAN (plastic material).
The probe is factory calibrated and ready to use, it is provided with a SICRAM2 module which stores the calibration data of the probe, allowing the interchangeability of the probes. The instruments measure:
- Temperature in Celsius or Fahrenheit temperature scale
- Relative humidity
- Absolute humidity
- Mixing Ratio
- Dew point
All models have both current and voltage outputs.
Some models are fitted with two control relays and one alarm relay, configurable by the user.
All models are fitted with a multistandard RS232/RS485 serial port and an auxiliary RS232C standard serial output. The RS485 serial output allows the management of more than one device in a network.
The models HD2717T... can be with or without LCD. The display shows on the first line the relative humidity or a derived parameter and on the second line the temperature in degrees
Celsius or Fahrenheit.
The data logger function allows to store the measures with a selectable storage interval.
The instrument setup remains permanently stored, while the real time clock is protected by an apposite Lithium battery against temporary mains voltage interruptions.
The power supply can be chosen, at the time of placing the order, between 24Vac/dc or universal 90...240Vac.
Chosing the correct type is easy:
S.TV Vertical probe L= 130mm
The material of the S.TC...probes can be chosen between stainless steel AISI304 or POCAN plastic material.
S.TC1.2 Probe L=130mm with cable 2m
S.TC1.2P Probe L=130mm with cable 2m (POCAN probe)
S.TC1.5 Probe L=130mm with cable 5m
S.TC1.5P Probe L=130mm with cable 5m (POCAN probe)
S.TC1.10 Probe L=130mm with cable 10m
S.TC1.10P Probe L=130mm with cable 10m (POCAN probe)
S.TC2.2 Probe L=330mm with cable 2m
S.TC2.2P Probe L=330mm with cable 2m ( POCAN probe)
S.TC2.5 Probe L=330mm with cable 5m
S.TC2.5P Probe L=330mm with cable 5m (POCAN probe)
S.TC2.10 Probe L=330mm with cable 10m
S.TC2.10P Probe L=330mm with cable 10m (POCAN probe)
Probes complete with SICRAM2 module for instruments HD2817TO.xx
S.TO1 horizontal probe L= 130mm
S.TO2 horizontal probe L= 330mm
HD2717t00S.TV , HD2717T.00 , HD2717T.0R , HD2717T.D0 , HD2717T.DR , HD2717TO.00 , HD2717TO.0R , HD2717TO.D0 , HD2717TO.DR
- P620µ sintered SS protection for probes diameter 26, thr..
- P720µ PTFE protection for probes diam. 14, thread M12x1
- HD9008.21.2Flange with support, hole 26mm for installation of S.TC prob..
- HD9008.21.1Flange with support, hole 26mm for installation of S.TC prob..
- P5Stainless steel grid protection for probes diam. 14, thread ..
- PG16Cable gland made of AISI 304 PG16 for probes 14mm.
- HD75Saturated solution for verifying RELATIVE HUMIDITY probes at..
- HD33Saturated solution for verifying RELATIVE HUMIDITY probes at..
- DELTALOG12Further unit of software for PC connection, for data downloa..
- P8Stainless steel grid and Pocan protection for probes diam. 1..
- HD9008.31Wall flange to fix the probes 14mm.